SUPER MICRO Computer X9SPU-F Processor and Heatsink Installation, Load Plate Load Lever

X9SPU-F Motherboard User’s Manual

2-2 Processor and Heatsink Installation

Warning: When handling the processor package, avoid placing direct

!pressure on the label area of the fan.

Notes:

Always connect the power cord last, and always remove it before adding, removing or changing any hardware components. Make sure that you in- stall the processor into the CPU socket before you install the CPU heatsink.

If you buy a CPU separately, make sure that you use an Intel-certified multi-directional heatsink only.

Make sure to install the system board into the chassis before you install the CPU heatsink.

When receiving a server board without a processor pre-installed, make sure that the plastic CPU socket cap is in place and none of the socket pins are bent; otherwise, contact your retailer immediately.

Refer to the Supermicro website for updates on CPU support.

Installing the LGA1155 Processor

1.Remove the protective plastic cap. Press the load lever to release the load plate, which covers the CPU socket, from its locking position.

Load Plate

Load Lever

2-2