X9SPU-F Motherboard User’s Manual

8.When a DOS prompt appears, type AMI.BAT BIOSname.### at the prompt.

Note: Do not interrupt this process until BIOS flashing is completed.

9.After seeing the message that BIOS update is completed, unplug the AC power cable to clear CMOS, and then plug in the AC power cable to power on the system.

10.Press <Del> continuously to enter the BIOS Setup utility.

11.Press <F3> to load default settings.

12.After loading default settings, press <F4> to save the settings and exit the

BIOS Setup utility.

C-4

Page 106
Image 106
SUPER MICRO Computer X9SPU-F user manual