9 |
WEB FILTER SETTINGS
Ignored Ports Tab
These settings affect how Web Filter monitors users:
•None - If selected, SurfControl monitors users based on workstation name or IP address.
•Enterprise User Monitoring (EUM) - If you have installed EUM, this option will be selected by default. SurfControl recommends the use of EUM for user name resolution. See the Starter Guide for details on how to install EUM.
Note: If you install EUM in a NetWare environment, Enterprise User Monitoring is not selected by default. You need to manually select it.
•NetBIOS - Based on the MAC address of the workstation.
•Lifetime of user name - This field is used by NetBIOS only. This determines how often Web Filter should check each workstation for active users. The default value is 600 seconds.
ENTERPRISE USER MONITORING
If you choose to use EUM after installation, the options in this section enable you to configure how to monitor user names in a NetWare environment. If you chose to monitor by EUM during installation, the NetWare Tree and Context details you entered in the Configuration Wizard will be shown, but will not be editable.
Note: These settings will only be available if the NetWare client has been installed. SurfControl recommend installing the NetWare client before installing Web Filter. See Chapter 2 of the Starter Guide for details.
•Preferred Schema - You can monitor by both Windows and NetWare users. You can select your preferred schema.
•NetWare Monitoring - If monitoring by NetWare user names, you need to enter the following details.
–NetWare Tree and Context - You need to enter your NetWare Tree and Context information in this field. (For example: OUname.Orgname.Treename).
Caution: Ensure these details are entered correctly, as this information can not be edited afterwards.
–NDS tree Username and Password - Web Filter requires a valid NDS tree username and password to be able to monitor NetWare users. For example: User.OUname.Orgname.
110 Administrator’s Guide | SurfControl Web Filter v5.5 |
