SVAT Electronics CV503-8CH instruction manual Getting Started, Using the Mouse, Screen Viewing

GETTING STARTED	SVAT ELECTRONICS
	nowyoucansee
POWERING ON DVR
1. Insert the power cord into the power supply.	Connect to a power source to turn on DVR

2.Plug the power cord into a power outlet (surge protected power outlet recommended).

3.Insert the power supply wire into the DC 12V port on the left side of the LCD-DVR.

4.There is a power on/off switch located on the left side of the CV503-8CH, press this down to turn on your security system. After a few moments, your DVR system will immediately begin recording!

GETTING STARTED

The CV503-8CH is deisgned to be user friendly - you will notice the iMenu bubbles located toward the bottom of your screen which will describe your menu options.

USING THE MOUSE

The included USB mouse makes using the CV503-8CH quick and easy. The mouse functions just like a mouse for a computer - it allows you to click on items to select and change them. To get the most out of your CV503-8CH, we recommend using the mouse.

Note: Ensure that the mouse is connected to the designated USB port before powering on

SCREEN VIEWING

By double clicking one of the eight camera screens, the viewing mode will switch to full screen mode. Double clicking again will bring you back to quad or eight screen mode (pending on what was set before).

Full Screen Quad Screen Eight Camera Screen

CV503-8CH-19M 11