SVAT Electronics CV503-8CH Main Menu, Type, To adjust the type of IP Mode you are using

MAIN MENU	SVAT ELECTRONICS
	nowyoucansee
NETWORK SETUP MENU
The network setup menu is your gateway to viewing your	Network Menu
footage online. This menu holds the information you need
to set up on-line viewing. The DVR is pre-configured to work
with most basic network setups and the values shown on
the screen are the values you will be using to setup and view
the DVR on a computer.
The network setup menu allows you to configure all
the settings necessary to view your DVR online. You can
configure the way the DVR acquires an IP address, adjust
which ports are used to communicate with the DVR, adjust
your DNS as well as set your information for a DDNS account.

Type:

Determines how the LCD-DVR will acquire and IP address: DHCP, Static IP or PPoE.

DHCP:

Dynamic Host Configuration Protocol (DHCP) is the most common setup for home or office networks. This allows the LCD-DVR to automatically acquire an IP address from the router. By default, the IP mode will mode will be set to DHCP.

Static IP:

Static IP addresses are manually assigned by the administrator. A static IP address would be beneficial if your internal IP changes frequently.

PPPoE:

Used for DSL services where individuals connect to a DSL modem. It is recommended to store PPPOE information in the router. If the information is not stored in the router, the DSL model will need to be configured. Contact your Internet Service Provider for details on modem configuration.

To adjust the type of IP Mode you are using:

1.Select the drop down menu beside the word TYPE.

2.Highlight the IP Mode you would like to use and press select.

3.Select “apply” to save your changes.

CV503-8CH-19M 22