MAIN MENU | SVAT ELECTRONICS |
| nowyoucansee |
MD Area
Motion Detection Area allows you to adjust particular areas of each camera where motion will or will not be detected. This is ideal if a camera is pointed in the direction of something that constantly has motion, such as a road, then, only the desired sections will trigger recording saving valuable space on your HDD.
To adjust the MD area:
1.Navigate to and select “SETUP” for the channel you would like to adjust the motion detection area. This will prompt the MD Area grid.
NOTE: By default, the grid is entirely red: the
2.Navigate to and select the squares where you do NOT want motion detected. A transparent square indicates that motion detection has been disabled.
3.Once motion detection areas have been determined, exit by right clicking or pressing “ESC,” then select “APPLY” to save settings.
Note: It is most efficient to set this up using the mouse.
Motion Area Mask
33 | |
|
|
