Network Setup Menu | SVAT Electronics CV503-8CH specs

ONLINE SOFTWARE	SVAT ELECTRONICS
	nowyoucansee

PTZ Setup

PTZ setup allows you to input information for the connected PTZ camera. (PTZ cameras not included). The information must be setup according to the PTZ camera so that the DVR and online software works with your PTZ camera and all its functions.

To input the PTZ information:

1.Find which camera channel the PTZ camera is hooked up to and from that row, select the proper information for each PTZ camera connected from the drop down menu on your DVR.

2. The information to select should be specified in the PTZ manual.

3. Once all the correct information is inputted into the online software, select “apply” to save changes.

NETWORK SETUP MENU

The network setup menu is your gateway to viewing your footage online. This menu holds the information you need about your DVR to set up on-line viewing. As you have already set up your networking viewing, the network menu can be used for reference purposes. The options and selections in this network setup menu are the same as the network menu on your DVR. For more information on your network menu and what it consists of please see “Network Setup Menu” on page 22 of this manual.


CV503-8CH-19M	70

Image 73

SVAT Electronics CV503-8CH Network Setup Menu, Information to select should be specified in the PTZ manual

Contents

Nowyoucansee Do not Return this Product to the Store Need HELP? Product Warranty Information Table of Contents Online Software Hard Drive Installed What is IncludedPeripheral Cable IR Remote Control Introduction Features Password Protection Included Mouse and Remote ControlExpandable up to 8 Total Cameras Search by Date, Time or Event7 LAN Connection Connects to Router Power on/off switchExternal I/O Menu Full screen Corresponding camera onAll Current menu Ensure that the cameras are strongly secured into the wall Basic Setup Instructions Basic Setup To connect a two-wire PTZ camera Connecting a PTZ CameraPlug the included RCA cable into the BNC connector Plug Mouse into USB port Getting Started Using the MouseGetting Started Screen Viewing Function Menu Function MenuFunction Menu Options Main menu Shortcut Menu PTZ setup menu PTZ CruisePTZ Camera Controls for the PTZ camera are as follows Start Record PIP ModeStop Record Start Cruise To zoom Digital ZoomMain Menu Camera Setup Using the KeyboardMain Menu Name Color PositionLive To Setup Privacy Zone To Enable/Disable the Time DisplayTime Display Privacy Zone Auto Sequence Record SetupChannel On/Off Quality Audio Rec To adjust and/or set a file sizeTo turn audio recording On or Off To program your LCD-DVR to always record Schedule Menu To adjust the recording scheduleNavigate to and select Schedule To copy one day’s schedule to another or all other days Main Menu To adjust the type of IP Mode you are usingType Web Port Media PortMedia Port vs. Web Port IP ADD To setup your Ddns on the DVR To adjust the DNS addressDdns Setup DNS To access and playback footage from a certain time To access and play back footageVideo Search Select the channel to view recorded footage from File List To access the file from the video search menuFile List Menu To Backup footage onto USB device BackupDevices HDD To Enable/Disable overwrite modeOverwrite Information this option includes USB Format HDD FormatTo Format the HDD To Format the attached USB drive Types of Alarms Alarm SetupAlarm Triggers To Set Alarms Mobile Setup PTZ Setup To change the status of motion detection for each camera Motion DetectionMotion Detection Menu MD Area To adjust the MD areaMotion Area Mask Maintenance Set automatic maintenance, reboots and updates System SetupSystem Setup Menu Date and Time To adjust the time To adjust the dateTo adjust the date format To adjust the time format Time Setup with DST options To customize the LCD-DVR daylight savings time adjustmentDaylight Savings Time DST To Enable Password Protection Password SetupTo Change the Password To Change the Device ID To adjust the resolution for your monitor Video SetupTo adjust your video system Video Setup To adjust the language Language Setup English onlyLanguage System Information System Maintenance Playback PlaybackPlayback Screen Playback Software InstallationComputer Playback To view footage though your computer An Entire Folder One VideoMultiple Folders Forward Frame Backward FrameDecrease Rate Increase Rate Date Video functions from the bottom bar are as followsTime 20. ST To save a section of video Setting Menu for Advanced Users only When the settings are adjusted to your liking, select OK To adjust the video settingsProcessor Amplification Control Help Menu Network Guide Connecting DVR to a RouterRequirements Preparing Your Computer for Viewing the LCD-DVR Finding your DVR’s IP Address Method Network GuideIf this is an option Viewing Your DVR on Your Computer Click apply Click OK Installing the ActiveX controls Log in to the DVR Using Internet Explorer Option Viewing Your DVR Outside of Your Network Option 1 recommended Port forward Home Option Open another web browser Testing Port Forwarding If YOU Cannot Connect Error / Page cannot be displayed Fill out Ddns setup with Dyndns account information To Configure the DVR to Work with DdnsDdns Dynamic DNS Next page has information about creating your host name Following instructions are for DYNDNS.org setup To set up a DynDNS name for your DVR LOG Into the Account and Setup a Ddns Host Default Password123456 Default PasswordTo View DVR Through Host Name Logging Into Software Online Software Cruise Setup Live ModePTZ Camera Controls Record Online Software To set up cruisePTZ Options Other Mouse Options To narrow down footage to search through To search through footage Playback options from left to right are as follows Record Mode Record ModePress select Select apply to save settings To set your DVR for schedule record To change the schedule Schedule adjustRed To copy one day’s schedule to another day Alarm Setup Information to select should be specified in the PTZ manual Network Setup Menu To change where the files are saved SettingsInternet Bandwidth File Save Path To customize the DVR’s daylight saving time adjustment Make sure password enable is set to onTo turn the DVR daylight saving time on Logout Host Info Mobile Viewing Set User name, password and port on DVRPort Forwarding From your computer or iPhone From your BlackBerry From your computerInformation Install viewing software, from your computer Windows Mobile setupPlay/Pause Snapshot PTZ Controls Full Screen View From your phone Symbian Mobile Phone will begin preparation to installFrom your mobile phone Troubleshooting Record function Power source’clock PM Function off Setting that will work in most networking situations Port Forwarding may not be set up correctlyConnect Side of DVR Specifications 10 sec Yes Pelco-D, Pelco-PMode Supports up to 8 letters Features What is IncludedCamera Power Supply Ports PIN DIN Female Connection connects to male RCA Drilling Template Wiring Instructions TV Lines Color Sharp CCDYes IP65 Support@SVAT.com 888.771.1701 Description Additional Accessories Visit US on the WEB