NETWORK GUIDE

SVAT ELECTRONICS

 

nowyoucansee

REQUIREMENTS

You will need to have:

The DVR connected to a router

The router connected to the Internet

A PC or laptop that is connected to the same router as the DVR. The PC can be connected by a wired or wireless connection

Internet Explorer 6.0 or higher (to check your version of Internet Explorer open I.E. In the top Menu bar select “Help” and then select “About Internet Explorer”. The version of I.E. will be displayed.)

A genuine and fully updated version of Windows XP, Vista or newer

Note: The computer and DVR need to be connected to the same router for initial setup. A computer will not always be necessary at the location to view the DVR.

CONNECTING DVR TO A ROUTER

1.Power off the DVR by removing the power cable from the left side of the LCD-DVR or flip the power switch.

2.Connect the included network cable to the left of the DVR in the Ethernet port (LAN).

3.Connect the other end of the network cable to an available port on the router.

4.Power on the DVR by reconnecting the power cable to the back of the DVR or by switching the power on.

CV503-8CH-19M

48

 

 

Page 51
Image 51
SVAT Electronics CV503-8CH instruction manual Network Guide, Requirements, Connecting DVR to a Router