English
•Load Setup Defaults
Lets you load the default values for all setup items.
•Discard Changes
Reverts to previously selected settings.
•Save Changes
Saves Setup data to CMOS.
6.7 How to Upgrade the BIOS
Your computer uses EPROM Flash BIOS chip that allows you to easily upgrade the BIOS program. When you update the BIOS, any customized settings you made are lost.
To upgrade the BIOS:
1.Insert the BIOS Update diskette into the diskette drive.
2.Power on the system with the diskette in the diskette drive.
3.On the DOS prompt, type the following command. A:\>Phlash XXXXXX.ROM (BIOS filename) or A:\>XXXXXX.BAT (Batch file for BIOS file)
Press <Enter> to run this BIOS utility. After the system has been successfully run this pro- gram, a message similar to the following appears:
Flash memory has been successfully programmed, press any key to restart the system. If the system does not restart, turn it off, then turn on again.
4. Press any key to restart this system.
Contact your dealer for the latest BIOS update file.
