English
Inserting Flash Memory Card
To insert a flash memory card into the slot is similar to ExpressCard. You only need to pay more attention whenever insert the flash memory card into the slot with the correct side.
For MMC and SD card, you should position the copper connector at the bottom side. For Memory Stick card, you should position the copper connector at the topside. All of these cards should be located at the center of the slots in inserting.
Slot | Card type | Copper connector |
4 in 1 | SD (Secure | Bottom side |
| Digital) | Bottom |
| MMC | Top side |
| (MultiMedia | |
| Top side | |
| Card) | |
|
| |
| MS (Memory |
|
| Stick) |
|
| MS_Pro |
|
Only one correct side can be accepted for the 4 in 1 card slots. If you cannot insert the card into the 4 in 1 slot or you had inserted the card but it is not recognized by the computer, ple- ase remove the card and turn the card upside down and insert it again. To prevent the dama- ge made both on card and the slot, never forced an entry into the slot with incorrect side.
Removing Flash Memory Card
It is similar to ExpressCard for removing a flash memory card from the slot. You should first disable the card setting in the system as described in the former section.
To remove the flash memory card, you should only pull out the card by finger, there is no
release button for flash memory slot.
