Taiwan Electrical & Electronic Manufacturers N930R manual Connecting the AC Power Source

2.2 Connecting the AC Power Source

The AC adapter provides external power source to your computer and charges the internal battery pack at the same time. The AC adapter also has an auto-switching design that can connect to any 100VAC ~ 240VAC power outlets.

To connect the power adapter:

1.Plug the AC power cord into the power socket of the AC power adapter.

2.Plug the other end of the AC power cord to a live AC wall outlet.

English

3. Plug the connector of the AC adapter to the DC-IN port found at the left side of the computer.

•Whenever possible, it is advisable to always have the AC adapter connected to the note book and the battery pack installed. This ensures continuous power supply and pre vents any data loss incurring from sudden power breakdown.

•For the power supply of this equipment, an approved power cord has to be used.

•Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices.

•Before cleaning the computer, make sure it is disconnected from any external power supplies (i.e. AC adapter).

2.3 Starting Your Computer

The Power/Resume button is found on the top of the base unit. Press the Power/Resume button to start your computer and check that if the Power LED turns on.