English
INSTALLING CARDREADER DEVICE DRIVER
Please follow the procedures below for installing the Cardreader driver:
Installing Cardreader driver for Windows XP
1.Click the Start button, then point to Run. The Run dialog box appears.
2.Click the Browse button and specify the directory as.
"E:\Drivers\Winxp\Card Reader\Setup.exe"
3.Click “Next” to implement the setup program to install this driver.
4.Click “Finish” to complete it.
INSTALLING SLIENT MODE UTILITY
Installing Slient Mode Utility for Windows XP
1.Click the Start button, then point to Run. The Run dialog box appears.
2.Click the Browse button and specify the directory as.
"E:\Drivers\WinXP\Slient Mode\PM_setup.exe".
3.Click "OK" to execute the setup program. The Welcome box appears.
4.Click “Next” then click Install to setup this driver when screen displays this command.
5.Tick the option "Finish" to complete.
2.6 Turning off Your Computer
If you are not going to use the computer for a while, it is best to turn off the power of the computer for longer use. Before turning off the power, you need to close first all application programs and shutdown the operating system.
After turning off the computer, make it a habit to leave the LVDS panel open for a while whenever used for an extended period of time. This allows the inside parts of the computer to cool off. Closing the panel will force the heat up against the LCD screen, which may degrade the LCD when done regularly. More importantly, never close the LVDS panel for a long period of time when computer is on and power saving features are disabled.
