Safety Information 67
Donot move the unit unless the power cord has been removed from the
socket.Otherwise you may damage the cord. The result could be a
short-circuitor a fire.
Donot place any heavy objects on the power cord. Do not pullor kink the
cordas this can result in damage to the cord. The result could be an elec-
tricshock or a fire.
Makesure that the machine is not standing on a cord to anothermachine
asthis can result in damage to that cord. The result could be a fire or
improperfunctioning of the unit in question.
Makesure that the power supply to the unit has the correct voltage. Oth-
erwisethe result could be a fire or an electric shock.
Switchoff the unit immediately and unplug the power cord if the power
supplycord is damaged. Failure to do so could result in a fire or an elec-
tricshock. Inform your customer support technical specialist.
Useonly extension cords that are designed for at least the maximum
powerrating of the machine. Extension cords with lowerr atingscan result
inthe unit overheating and can even lead to a fire.
Performonly the procedures that are described in this manual. Using the
machineimproperly can result in a fire or an electric shock.
Donot place any heavy objects on the machine.
Donot open any covers on the machine while printing is in progress.
Donot switch off the unit while printing is in progress.
Donot place any magnetic objects near the machine.
Donot use any flammable sprays, liquids or gases in the vicinity of the
machine.
Donot remove any safety devices and do not alter theconstruction of the
machine.The unit is equipped with high-voltage components. Using the
machineimproperly can result in a fire or an electric shock.
Donot insert any paper clips, staples or other small metal objectsinto
openingson the machine. The result could be anel ectricshock or a fire. If
metalpieces are fed into the machine, switch it off immediately,discon-
nectthe power cord and inform your customer support technical special-
ist.
Donot place coffee cups, drinks bottles or other containerswith liquids in
themon the machine. If liquid enters the machine the result could be an
electricshock or a fire. If liquid does get into the machine, switch it off
immediately,disconnectthe power cord and inform your customer support
technicalspecialist.
Ifthe machine becomes unusually hot, or if you notice smoke or an
unusualodor coming from the machine, switch it off immediatelyand