About the Indicator Functions
Indicator Functions
The control panel has two indicators |
| |
and one button. The control panel | 1 | |
indicators provide information on the | ||
| ||
status of the printer. |
| |
2 | ||
| ||
| ||
The Cancel button allows you to: | 3 |
Continue a print job after an error message
Cancel a print job
Continuing a Print Job after an Error Message
You can continue the print job after correcting the following types of errors:
When the print job is too complex and the memory capacity of the printer is inadequate
When there is no more paper in the tray
When paper of a different format than that set in the printer driver was fed into the printer
1
2 Perform the remedial action according to the error.
3
For details on the error messages, refer to chapter 8, “Troubleshooting” on page 47.
Cancelling a Print Job
You can cancel a print job that is currently being processed.
1 While data is being processed or printed (the green “Ready” indicator is blinking), hold down the Cancel button for more than 5 seconds.
2 Release the Cancel button after both indicators light up. The current print job has now been cancelled.
About the Indicator Functions | 3 |
