3 BASIC OPERATION
■Band scope function
What is the band scope function?
The band scope detects signal availability in the range of ±5 channels (up to ±100 kHz) from the displayed frequency, and displays the result on the multi function
In this case, channel refers to sweep step or channel space according to the set tuning step. For example, when the tun- ing step is set to 5 kHz, the band scope detects 25 kHz above and below the displayed frequency, then displays the result on the LCD.
When the tuning step is set above 20 kHz, the band scope function automatically changes its sweep step to 20 kHz. However, when the sweep step is changed to 20 kHz, the tuning step remains the same.
Also, when a
Preparation
The band scope function is activated only when FM receive mode is selected in VFO mode.
qPush [V/M] to select VFO mode. (p. 11)
wPush [MODE] one or more times to select FM mode. (p. 12)
eWhile pushing [FUNC], push [(MODE)TS]
rRotate [DIAL] to select the tuning/sweep step. t Push [CLR] to return to VFO mode.
4
3
235
1
17