Tamron IC-R10 Skip function, Program skip setting - cont, Memory skip setting

5 SCANNING OPERATION

■Skip function

Two skip functions are available as fol- lows:

1. Program skip function

Used with full, program and auto-mem- ory write scans, this function allows you to skip specified frequencies stored in BANK R (skip function must be ON for these channels).

2. Memory skip function

Used with memory, BANK and mode select scans, this function allows you to skip specified memory channels.

These are activated when PROGRAM SKIP or MEMORY SKIP is turned

ON in set mode (p. 59).

Their factory pre-programmed settings are:

PROGRAM SKIP : OFF

MEMORY SKIP : ON

1. Program skip setting

qSet PROGRAM SKIP to ON in set mode (p. 59).

PROGRAM SKIP

ON

wPush [V/M] to select VFO mode. (p. 11)

eStart full or program scan (p. 35).

4While pushing

[FUNC], push [(V/M)MW] during scan pause if you want to skip the paused frequency.

Skip frequencies are stored in BANK-R memory channels (count- ing down from channel 99 to 00).

2.Program skip setting

— cont.

When BANK R becomes full, an error beep sounds when trying to set more skip frequencies.

When you want to cancel the skip function, turn OFF the SKIP setting in the memory channel (p. 56).

tAfter set up, push [SCAN] or [CLR] to stop scanning.

Stored frequencies are skipped dur- ing the next full, program or auto- memory write scan operation.

1. Memory skip setting

Set the skip condition in each mem- ory channel— refer to p. 55 MEM- ORY EDIT for details.

45