Tamron IC-R10 instruction manual Specifications, General, Receiver

14 SPECIFICATIONS

GENERAL

Frequency coverage

Tuning steps

Number of mem. channels Receive modes Antenna connector Power supply requirement

Current drain (at 13.5 V DC)

Rated audio Stand-by Power saved

Usable temperature range Scan speed

Dimensions

:			(Unit: MHz)
	Version	Frequency Range
		0.5000– 823.9999
	U.S.A.	849.0001– 868.9999
		894.0001–1300.0000
	Europe	0.5000–1300.0000
	France	0.5000–	87.5000
		108.0000–1300.0000

:0.1, 0.5, 1, 5, 6.25, 8, 9, 10, 12.5, 15, 20, 25, 30, 50 and 100 kHz

or user programmable (0.1–999.99 kHz/0.1 kHz steps)

:1000

:FM, AM, WFM, USB, LSB, CW

:BNC (50 Ω)

:4.8 V DC [4 AA (R6) Ni-Cd cells]; 4.8–16 V DC acceptable (negative ground)

:

180 mA typ.

110 mA typ.

38 mA typ.

:–10˚C to +50˚C (+14˚F to +122˚F)

:16.7 ch/sec. (programmed)

6.25 ch/sec. (memory)

:58.5(W) ⋅ 130(H) ⋅ 31.3(D) mm 2.3(W) ⋅ 5.1(H) ⋅ 1.2(D) in

RECEIVER

Receive system	: Triple-conversion superheterodyne
Intermediate frequencies	:

1st 266.7 MHz (340.0000–999.9999MHz)

429.1MHz (except above freq.) 2nd 10.7 MHz

3rd 455 kHz

Sensitivity			:
	Freq. (MHz)		FM	WFM	AM	SSB/CW
	0.5– 4.9999		0.5 µV	—	1.6 µV	0.4 µV
	5–	74.9999	0.32 µV	—	1.0 µV	0.25 µV
	75–	199.9999		1.0 µV
	200–	339.9999	0.45 µV	2.2 µV	1.6 µV	0.4 µV
	340–	699.9999	0.35 µV	1.3 µV	1.4 µV	0.32 µV
	700–	799.9999	0.79 µV	2.0 µV	2.0 µV	0.63 µV
	800–	899.9999	0.5 µV	1.6 µV	1.6 µV	0.4 µV
	900–1300.0000			—
Squelch sensitivity			:
	Freq. (MHz)		FM	WFM	AM
	0.5– 4.9999		0.5 µV	—	1.6 µV
	5–	74.9999	0.32 µV	—	1.0 µV
	75–	199.9999		1.0 µV
	200–	339.9999	0.45 µV	2.2 µV	1.6 µV
	340–	699.9999	0.35 µV	1.3 µV	1.4 µV
	700–	799.9999	0.79 µV	2.0 µV	2.0 µV
	800–	899.9999	0.5 µV	1.6 µV	1.6 µV
	900–1300.0000			—

Weight	: 310 g; 10.9 oz.
CI-V connector	: 3-conductor 3.5 (d) mm (1/8 in)

All stated specifications are subject to change without notice

or obligation.

77

Selectivity	:AM, FM	More than 15 kHz/6 dB
	SSB	More than 4 kHz/6 dB
	WFM	More than 150 kHz/6 dB
Audio output power	:More than 120 mV at 10 % distortion
	with an 8 Ω load
External speaker connector	: 3-conductor 3.5 (d) mm (1/8 in)