■Tuning a frequency (via the keypad)
BASIC OPERATION 3
When you know the exact frequency you want to listen to, the quickest way to tune it is by direct keypad entry.
Remember that the frequency must be between 0.5 MHz and 1300 MHz.
The diagram below shows the correla- tion between the function display fre- quency digits and the frequency.
| VFO |
FM | 300.0000 |
| |
1 GHz | 100 Hz |
100 MHz | 1 kHz |
10 MHz | 10 kHz |
1 MHz | 100 kHz |
1. Select the frequency
Select VFO mode and the receive mode in advance then:
Push the numeral keys in the same order as the frequency you want to tune (including the decimal key).
BSCOPE VSC SLEEP
1 2 3
4 5 6
7 8 9
AFC ATT NB/ANL
. 0 ENT
•If you make a mistake, push [CLR] and start again.
2. Enter the frequency
When the frequency you want is dis- played:
Push [ENT] (or numeral keys for the 0.1 kHz digit) to enter it.
•When you select a frequency outside of the allowed range, the display will revert back to the previously displayed fre- quency.
14
