Tamron IC-R10 Program scan or EASY mode channel edit, Enter edit mode, Set channel names

8 EDIT FUNCTION

■Program scan or EASY mode channel edit

1. Enter edit mode

qPush [V/M] or [EDIT] to select

VFO or EASY mode (p. 11 or 50).

w While pushing	[FUNC], push
[(4)PROG-S] or [(5)AMWS] to se-
lect program or	auto-memory

2. Set channel names

q Enter channel

1names from the

keypad or by ro- tating [DIAL].

• When you enter

3. Set start frequency

qEnter the start frequency via the

keypad or [DIAL].

wPush [EDIT] to change the item.

1

write scan mode; then select the

scan channel (pgs. 40, 41) when

VFO mode is selected in 1, push

digit key to select scan channel

when EASY mode is selected

1

channel names with [DIAL] or a character assigned to the same key, push [ENT] before you enter the next character to

in 1.

e Push [EDIT]

2

change the digit (see page 72 for alphanumeric key assignments).

1

2

to enter memory edit mode.

1

2 2

3

wPush [EDIT] to change the item. either

VFO EASY

FM

[DIAL] SET CH NAME

or

digit

key

	2
	either
	VFO EASY
	FM
[DIAL]	START FRQ
or	144.0000
digit
key

57