Tamron IC-R10 instruction manual Troubleshooting

TROUBLESHOOTING 13

PROBLEM	POSSIBLE CAUSE	SOLUTION	REF.
Cannot start scanning.	• [SQL] is rotated too far clockwise.	• Rotate [SQL] counterclockwise.	p. 11
	• Incorrect receive mode (LSB, USB or CW) is se-	• Set receive mode to one of FM, WFM or AM.	p. 12
	lected.
	• Scan edges are set to the same frequencies.	• Set scan edges to different frequencies.	p. 57
	• 2 or more memory channels have not been pro-	• Program 2 or more memory channels.	pgs. 25,
	grammed.		26, 27
	• No channels have been programmed with the se-	• Program at least 2 channels with the selected re-
	lected receive mode (when using mode select	ceive mode.	pgs. 25,
	scan).		26, 27
Cannot recall memory	• Wrong operating mode is selected.	• Push [V/M] to select memory mode.	p. 23
channels.
WFM signal is distorted.	• Not tuned to the proper frequency.	• Set the frequency 30–50 kHz less.	p. 20

76