Set the VSC
Set the VSC ON if necessary.
While pushing [FUNC], push [(2)VSC] (VSC indicator ap- pears).
| Appears |
FUNC | VFOVSC |
SIGNAVI | FM |
144.0000 | |
+ |
|
6 |
|
While pushing [FUNC], push [(2)VSC) to turn OFF the VSC (VSC indicator disappears).
What is VSC?
The VSC (Voice Scanning Control) pauses a scan only when modulated signals are received. Scanning continues when unmodulated or beat signals are received.
SCANNING OPERATION 5
Set the scan delay
Set the scan delay.
While pushing [FUNC], push
[(CLR)SET], then push [EDIT] one or more times until SCAN DELAY appears (p. 62).
Rotate [DIAL] to set the scan delay time.
Push [CLR] to return to VFO or
MEMORY mode.
What is scan delay?
Scan delay affects scan pausing as follows:
5SEC: scan automatically resumes 5 sec. after paus- ing
10SEC: scan automatically resumes 10 sec. after pausing
PAUSE: scan automatically resumes 2 sec. after a re- ceived signal disappears
38
