MEMORY MODE 4
3.Programming details
— cont.
tPush [EDIT] to change the re- ceive mode item.
yRotate [DIAL] to select AM mode, then push [EDIT] to change the item.
| VFO |
| FM |
[DIAL] | SET MODE |
| MODE:AM |
uRotate [DIAL] to select the OFF position for SKIP setting, then push [EDIT].
| VFO |
|
| FM |
|
[DIAL] | SET SKIP |
|
| SKIP: | OFF |
3.Programming details
— cont.
iRotate [DIAL] to select the OFF position for attenuator setting, then push [EDIT].
| VFO |
|
| FM |
|
[DIAL] | SET ATT |
|
| ATT: | OFF |
oRotate [DIAL] until the character “A” appears, then push [ENT] or push [2] once to enter “A”.
| VFO |
| FM |
[DIAL] | SET |
ENT | F:A |
or
2
!0Rotate [DIAL ]then push [ENT] to enter the characters for BANK names or push numeral keys (see page 72 for alphanumeric key as- signments).
3.Programming details
— cont.
!1The display shows the pro- grammed frequency for confirma- tion; push and hold [EDIT] for 2 sec. if the frequency is correct.
•After pushing and holding [EDIT], VFO mode is automatically selected.
EDIT | VFO | |
| ||
Push | A M | |
121.5000 | ||
for | ||
| ||
2 sec. |
|
32