Tamron IC-R10 instruction manual Memory Mode, Selecting MEMORY mode, Select MEMORY mode, General

4 MEMORY MODE

■General

What is memory mode?

MEMORY mode is the second operating mode— the first being VFO mode. MEMORY mode is used to store often- used frequencies, their receive modes, attenuator settings (p. 65), as well as skip information for scanning (p. 56). This provides convenient recall and scanning capabilities. Also, frequencies are receivable in MEMORY mode which means you can listen to received signals while you are in MEMORY mode.

The IC-R10 has 1000 memory channels for your conve- nience. They are divided into 18 banks: BANKS A to P con- tain 50 channels each for normal usage, while BANKS Q and

Rcontain 100 channels each for auto-memory write scan (p. 41) and program skip scan (p. 45), respectively.

Each BANK and memory channel has BANK or memory name capabilities, for convenience. BANK names can be up to 10 characters; channel names up to 8 characters. Programmed contents and names can be easily copied to other channels using the memory copy function (p. 33) and easily edited using the EDIT function (p. 51).

■Selecting MEMORY mode

Select MEMORY mode

Push [V/M] to select MEMORY mode.

•“MEMO” appears in the function display.

•Push [V/M] again to return to VFO mode.

Appears

MEMO

FM

A00 144.0000

23