CREATING TEXT
Initially, the text size will be set to the default value according to the label loaded in the printer. The text size can be increased or decreased for each individual line of the label. There is a maximum of 8 lines available for creating text.
Text Rotation
Label legends may be rotated from 0 degrees to 90 degrees in the clockwise direction. The page shaped icon in the lower right hand corner of the display
indicates the current rotation. To change the rotation, press the 
key and
then press the 
key. Repeat this procedure to return the rotation back to the previous setting.
Text Justification
Label legends may be left justified, center justified, or right justified. The page shaped icon in the lower right hand corner of the display indicates the current
justification setting. To change the justification, press the 
key and then
press the 
key. Repeat this procedure until the desired justification is selected.
Text Options
There are two text options available for each line of text. The options are called style and orientation. The style can be set to either normal or underlined. The orientation can be set to 0 degrees, 90 degrees, 180 degrees, or 270 degrees. The orientation setting refers to the rotational position of the individual text characters, not the rotational position of the legend as a whole. To rotate the entire legend simultaneously, refer to text rotation described above.
To access text options, move the cursor over any character within a text string
and then press the 
key. Use the up or down directional arrows to select ‘Style’ or ‘Orient’. Next, use the right or left directional arrows to change the
settings. Last, press the 
key to accept the changes and to return to the home screen. Each individual line on a label may have different text options selected.
26
