CREATING SERIALIZATIONS
The Serialization Tool
The serialization tool is used to automatically number labels in a sequence. The sequence can be either numeric (1 to 999) or alphabetic (A to Z). A serialization is defined by a start value, an end value, and a step value.
To correctly define a serialization, the end value must be larger than the start value and the start and end values must be both numeric or both alphabetic. (Numbers and letters cannot be used together when defining a particular serialization.)
The step value can be any number between 1 and 99.
Serializations can be combined with other label items, such as text, boxes, lines, etc. For example, to create a prefix or a suffix to a serialization, enter text immediately before or after the serialization.
Serializations can be printed as text or as bar codes on a label.
Creating a Serialization
The serialization tool should be accessed from the home screen. To access the serialization tool:
1.Press the 
key to enter the tools menu.
2.Press the down directional arrow key to highlight the serialization tool.
3.Press the 
key to select the serialization tool.
4.Use the up or down directional arrow keys to select the serialization parameters: Start, End, or Increment.
5.Use the right or left directional arrow keys to set the values for Start, End, or Increment.
NOTE: Pressing the right directional arrow key will highlight the current value of the selected parameter. For a new serialization the start and end values will display an asterisk *. When the value is highlighted, enter a number (1 to 999) or a
letter (A to Z) and then press the 
key.
The cursor will automatically move to the next parameter.
6.Repeat step 5 for each parameter.
28
