USING FILE MANAGER

The VIPER™ LS6 has the ability to store and recall label files and data lists. Label files and data lists are stored and recalled within File Manager. Label files are designated with a .LS6 ending. Data lists are designated with a

.DAT ending.

To access File Manager, enter the setup menu and:

1.Use the up or down directional arrows to highlight File.

2.Press the right directional arrow key to enter File Manager.

3.Use the up or down directional arrow keys to highlight Filename.

4.Use the right or left directional arrow keys to select the desired file. There are 20 file storage locations in the VIPER™ LS6.

NOTE:

When saving a new file, press the

 

key to begin entering

 

a file name. Use the alphabetic or numeric keys to enter a

 

file name. After entering a file name, press the

 

 

key

 

 

 

 

again to Save.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE:

When renaming a previously saved file, press the

 

 

 

 

key to

 

 

 

 

begin entering the new file name. Use the alphabetic or numeric keys to enter the new file name. After entering the

name, press the key again to Save. The printer will then prompt to Overwrite File? 1-Yes2-No. Press 1 to accept the new file name or press 2 to keep the previous file name.

5.Use the up or down directional arrow keys to highlight Action.

6.Use the right or left directional arrow keys to select Save, Load, Delete, or Delete All.

WARNING: Selecting Delete All will erase all stored label and data files.

7.Press the key to complete the selected action.

8.Press the key to return to the setup menu.

9.Press the key again to return to the home screen.

NOTE:

When recalling a previously stored label file, the part number

 

of the stored label file must match the part number of the

 

label roll installed in the printer. If the part numbers do not

 

match, an error message will display on the screen.

48

Page 48
Image 48
Tamron LS6 quick start Using File Manager