TANDBERG TC2.1 manual Setting a menu password, How to set the menu password, Administrator Guide

Profile series with Codec C60 Administrator Guide

Contentsontents

IntroductiIntroduction

GettingGeGetti startstartedtarted

AboutAbout tthe menuss

The setSettingsings menumenu

TheS ttingsSettingsLibrarylibrary

Camerasa eras

AppenAppendicesic

ContactContact us

7	Setting a menu password
	It is highly recommended to define a password to access the Advanced menus.
	Changing these settings may affect the behavior of the system and should be

done by the system administrator.

NOTE! The menu password will only apply to the Advanced menu. The codec and the web interface can be password protected with an administrator password. See the Password protection section in the Appendices for a detailed description.

NOTE! When you define or change a password make sure you save a copy of the password in a safe place.

How to set the menu password

Navigate to Settings > Advanced > Change password

1.	On the remote control, press the # key to toggle between lower or upper case
	characters and numbers: abc/ABC/123
2.	Enter the menu password. The password you enter is hidden, as each
	character is replaced with a star (*).
3.	Navigate to Save to save the changes, or Cancel to leave without saving.
4.	Press Home (   ) to exit.

D14324.04—DECEMBER 2009 20