TANDBERG TC2.1 manual The Advanced menu, How to change the menu password, Setting a menu password

Profile series with Codec C60 Administrator Guide

Contentsontents

IntroductiIntroduction

GetGettinging startstarted

AboutAbout tthe menuss TheThesettingssSe ti gs menumenumenu TheS ttingsSettingsLibrarylibrary

Camerasa eras

AppenAppendicesic

ContactContact us

The Advanced menu

How to change the menu password

If a menu password has been set you will be asked to enter a password to get access to the Advanced menu.

When turning on the system for the first time, the password is not set.

NOTE! The menu password will only apply to the Advanced menu. The codec and the web interface can be password protected with an administrator password. See the Password protection section in the Appendices for a detailed description.

When you define or change a password

!make sure you save a copy of the password in a safe place.

The Advanced menu can be password protected. If so, type in the password and press OK to proceed or Cancel to go back to the Settings menu

Setting a menu password

1.On the remote control, press the # key to toggle between lower or upper case characters and numbers: abc/ABC/123

2.Enter the password. The password you enter is hidden, and each character is replaced with a star (*).

3.Press Save to save the changes, or Cancel to leave without saving.

4.Press Home (   ) to exit.

D14324.04—DECEMBER 2009 26