TANDBERG TC2.1 cont, Best view-Face recognition, Using Best view, The PrecisionHD 1080p camera

Profile series with Codec C60 Administrator Guide

Contentsontents

IntroductiIntroduction

GetGettinging startstarted

AboutAbout tthe menuss

The setSettingsings menumenu

TheS ttingsSettingsLibrarylibrary

CamerasCa rass

AppenAppendicesic

ContactContact us

The PrecisionHD 1080p camera,

cont...

Best view—Face recognition

This camera is capable of face recognition when used with TANDBERG C60/C90 Codecs. Consequently, the functionality is subject to change without prior notice in order to take advantage of further developments.

NOTE: Observe that the Best view feature is still a preview feature.

The face recognition system aims to search for faces in order to optimize the picture frame, hence the name Best view. Once a face or group of faces has been detected camera zoom and camera angle will be changed accordingly to obtain an optimal presentation on the screen.

Read this before using Best view:

•The Best view optimization process may take up to 5 seconds.

•The detection of faces works better when people look towards the camera.

•The area from the eyebrows down to just below the lips should be uncovered.

•Beard is normally not a problem.

Using Best view

Note that Best view works with TANDBERG C60/C90 Codecs only!

1.Press the Layout key on the remote control to display the Layout menu. Select Selfview to be shown as required.

2.Press the Home key on the remote control to display the Home menu and select Camera control

3.Press the second soft button on the remote control to display the Preset menu. Select Best view from the menu press the OK key on the remote control to start the Best view optimization process.

4.Look towards the camera for about five seconds. The system will look for human faces and adjust the zoom and camera angle to obtain a best fit.

Select Selfview to be shown.

D14324.04—DECEMBER 2009 50