Cassette Tapes (2)
Automatic tape type detection function
This cassette deck can detect what type of tape is being used based on the detection holes in the cassette shell. Be sure to use cassettes with detection holes.
Metal (Type | ) | Automatic tape type | |
detection holes | |||
Chrome (Type ) |
| ||
|
| ||
Normal (Type ) |
|
|
Accidental erasure prevention tabs
Tabs in the top of the cassette shell allow you to prevent important recordings from being erased by mistake. There are two tabs in each cassette
Once these tabs have been removed using a screwdriver or similar tool, there is no chance of the recording function being activated by accident.
Accidental erasure prevention tab for “side A”
“side A”
<To record on a cassette that has had its tab broken off, cover the hole using a piece of adhesive tape. Be careful not to block the tape type detection holes.
Dolby NR (noise reduction)
Dolby NR is designed to reduce tape hiss, which is noise introduced during the recording and playback processes. This cassette deck is equipped with Dolby
Use the DOLBY NR switch to turn the Dolby NR on and off.
<The Dolby NR system affects both recording and playback quality. For playback, be sure to set the DOLBY NR switch to the same position used when the recording was made.
10
Connections
Voltage Selection
(General export/North America models only)
QBe sure to remove the power cord from the AC outlet before changing the position of the voltage selector switch.
1.Locate the VOLTAGE SELECTOR switch on the rear panel.
2.Using a
IN NORTH AMERICA USE ONLY ON 120 V SUPPLY.
Notes on turning on or off the power
When an amplifier is connected to the
When turning on the power
1.
2.Amplifier
When turning off the power
1.Amplifier
2.