DE
F
A B C
cables RCA |
|
|
|
|
| cables RCA | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Amplier |
|
|
|
|
| Turntable | ||||
REC | PLAY |
| ||||||||
| ||||||||||
(OUT) |
| (IN) | ||||||||
cabledigital Optical |
|
|
|
| cable USB |
|
|
|
| ||
|
|
| |||
|
|
|
| ||
|
|
|
| ||
|
|
|
| ||
|
|
|
| ||
|
|
|
| ||
|
|
|
| ||
|
|
|
| ||
|
|
|
| ||
|
|
|
| ||
|
|
|
|
CD Player,
MD Deck, etc.
DIGITAL OUT
Wall
socket
Computer
ENGLISH
QAfter all connections are complete, connect the power cord’s plug to the AC wall socket.
<Read the instructions of each device that you intend to use with this unit.
<Be sure to connect each plug securely. To avoid hum and noise, do not bundle the connection cords.
ALINE IN/OUT jacks
These jacks transmit an analog
Be sure to connect: |
|
White plug e White jack | (L: left channel) |
Red plug e Red jack | (R: right channel) |
White (L) | White (L) |
Red (R) | Red (R) |
BPHONO jacks [PHONO]
Connect the turntable’s RCA pin cable to the PHONO jacks.
Be sure to connect: |
|
White plug e White jack | (L: left channel) |
Red plug e Red jack | (R: right channel) |
<Moving Magnet (MM) cartridges can be used for this unit.
CSIGNAL GND [SIGNAL GND]
Connect the ground lead of the turntable to this terminal.
<This is not a safety earth.
<If the turntable’s ground lead is not connected to this terminal, hum noise may be heard.
DDIGITAL IN terminal [DIGITAL IN]
To record digital audio signals, connect this terminal to the digital output terminal of a digital device such as a CD player with a commercially available optical digital cable.
If the sampling frequency of the input digital signal is changed while an optical digital cable is connected, it might not be recognized correctly. (“OPTICAL UNLOCK” will appear on screen.)
If this occurs, disconnect the optical digital cable from the connector once and reconnect it after changing the frequency. Alternately, after changing the frequency, you can turn the power off once and then turn it on again.
<When the sampling frequency of the input digital signal is 48 kHz, some of the audio specification values might differ.
EUSB port
Connect this to a computer USB port to convert sound from this unit to a digital signal and output it to the computer.
FAC Power Cord
After all other connections are complete, connect the plug to an AC wall outlet.
QIf you do not use this unit for a long period of time, unplug the power cord from the wall outlet.
Q Be sure to connect the power cord to an AC outlet that supplies the correct voltage.
QHold the power plug when plugging it into an outlet or unplugging it. Never pull or yank on the power cord.
11