LINE IN PHONO

Recording on a Cassette Tape (2)

8 Press the RECORD TAPE button again to start recording.

When recording from an external source, you must also start playback of the source.

The red indicator above the RECORD TAPE button and the icon on the display stop blinking.

QCAUTION

Do not turn the unit off or disconnect the power cord during recording. Doing so could damage the unit and connected devices.

<To stop recording temporarily, press the TAPE Pause (J) button. Press the button again to resume recording.

Recording from CD or USB flash drive

When source playback stops, recording also automatically stops. To stop recording, press the TAPE Stop (H) button. Doing this also stops playback of the recording source.

<During auto-reverse recording to a tape, if “side A” of the tape ends in the middle of a track/file while recording from a CD or USB flash drive, the unit starts recording again on “side B” from the beginning of the track/file that had been interrupted.

Recording from an external source

When source playback stops, recording does not automatically stop. Press the TAPE Stop (H) button to stop recording.

Erasing recordings

With every new recording, the contents of a cassette tape will be overwritten (the previous recording is erased). You can erase a cassette tape by setting the recording level to MIN to record silence.

<We recommend that you select a source for recording that does not output any sound during the erasing process.

1 Press the RECORD TAPE button to start recording standby.

2 Set the REC LEVEL control to the minimum position (MIN).

3 Press the Reverse (g) or Forward (t) play button to start erasing (by recording silence).

44