TEFAL928-8IN1_NC00116573_MISE EN PAGE 1 22/02/13 09:01 PAGE11

display "--" and the "Start" indicator light will flicker – Fig.26. Press the "Start" button, the cooker will enter "Dessert" cooking mode, the “Start” indicator light will remain on and the digital screen will display "-"Fig.17.

The dessert function remains on continuously for 45 minutes then the "Keep Warm"function will turn on. After cooking, the buzzer will beep for several times, the "Keep Warm" indicator light will turn on and the digital screen will display "b", indicating the rice cooker enters "Keep Warm" status

Fig.15.

Automatic keep warm function

Starting your rice cooker in keep warm mode must only be used for hot food.

The preset of time is not available for the "Keep Warm/Cancel" Function.

Press "Keep Warm/Cancel" button while in standby mode, the "Keep Warm/Cancel" indicator light turns on and the digital screen will display "b", indicating the cooker enters keep-warm mode – Fig.15.

Presss "Keep Warm/Cancel" button while a program is set or a function is in working mode to cancel it and return to standby mode.

If the cooker remains on "Keep Warm" continuously for 24 hours, the system will automatically cancel "Keep Warm" function and return to standby mode.

The "Keep Warm" function should not be used for reheating food.

Power failure backup (short memory function)

The cooker has a "short memory" function in case of power cuts of 3 to 10 seconds. When the power returns, the cooker returns automatically to its original setting and continues to cook. In case of long power cuts, the cooker will return to the standby mode.

On completion of cooking

The escaping steam is very hot.

Never remove the bowl after cooking without protective oven gloves.

Open the lid.

Serve the food using the plastic spoon supplied with the appliance and close the lid.

The food remaining in the bowl will keep warm for any further servings.

Don't forget to press "CANCEL" button after keep warm and unplug the appliance.

Cleaning and Maintenance Condensation collector

The condensation collector should be emptied and cleaned after each use.

11