Teka ieka MWL 20 BIT During operation, Function interruption, End of programme, Energy Saving

During operation...

During the cooking process, you may open the door at any moment, as:

•THE PRODUCTION OF MICROWAVES IS IMMEDIATELY INTERRUPTED.

•The grill is deactivated and remains at a high temperature.

•The timer stops and the screen shows the operating time that is left.

If you wish, you may:

1.Turn around or move the foods to ensure uniform cooking.

2.Change the power of the microwave, using the “-“ and “+“ buttons.

3.Select another function, using the function buttons.

4.Adjust the operating time that is left, by pressing the “-“ and “+” buttons.

Close the door again and press the start button. The appliance will start to function again.

Function interruption

To interrupt the programme, press the STOP button or open the door of the appliance.

If you wish to cancel the cooking process, close the door again and press the STOP button. The oven will beep and the screen will display the time.

End of programme

When the programme is finished, the microwave beeps 3 times and the screen displays “End”. The beeps are repeated every 30 seconds, until the door is opened or the “STOP” button is pressed.

EN

Energy Saving

This microwave is equipped with a special energy-saving system, which is enabled automatically after 10 minutes of inactivity.

In the energy-saving mode, all the buttons are off and the screen only displays the clock.

The energy-saving mode is automatically disabled when a function button is pressed.

36