Up to 18, 1x4, 1x8, 1x16, or 1x32 Telect Splitter Modules can be installed in the splitter bulkhead at the bottom of the front compart- ment. Each splitter module consists of the splitter, one blue “input” jumper, and either 4, 8, 16, or 32 yellow “output” jumpers. All are 2 mm jumpers, 2.1 m in length.

Splitter module installation and all of the distribution changes (patching) occur in this front compartment:

•Unassigned jumpers are routed via spools and arcs to a parking station for later subscriber assignment.

•Assigned jumpers are routed via the spools and arcs to the front of the SC/APC adapters in the front of the patch modules for cross connection to the distribution fiber connected to the rear of the patch modules.

FEATURES

•Simple cabling scheme. Separate compartments for OSP cable (feeder & distribution at the rear) with splitter growth and cross-connections at the front

•Patch module bulkhead swings out into front compartment for convenient adapter and connector inspection and mainte- nance

•30 mm (min.) bend radius control throughout cabinet & accessories

•Highest splitter density — up to 32 splits per splitter module

•Expandable. Easily add splitter modules as distribution grows

•Popular bulkhead-style modular distribution (up to 6, 72-channel patch modules)

•Bulkhead-style splitter bank for up to 18 Splitter Modules containing 1x4, 1x8, 1x16, or 1x32, premium PLC splitters

•Laser eye protection throughout. All adapters and connectors include dust caps

•Front & rear padlockable doors with wind strays (padlocks not included). Routing guide and designation chart located con- veniently on inside of front door.

•Includes grounding bar for armored cable.

BENEFITS

•Low cost — High Fiber Density — Versatility

•Better access — full front and rear doors open wide for simple access and installation

•Simple Site Prep

•Easy Installation. Ideal for both local and remote sites

•Designed for compliance: NEMA 4, GR-771, GR-487

•Designed & Built for Growth

•Simple, straight-forward cable management, access, circuit identification.

SPECIFICATIONS & CAPACITIES

•Dimensions (Overall WxHxD): 28 x 54 x 18 in (710 x 1375 x 460 mm). See the following for detailed dimensions.

•Weight (without modules, accessories, or cabling): ~125 lb (~60 kg).

•Feeder & Distribution Cable Entrance Positions/Capacity: 16

•Cable Diameter: 3/8 in. (9.6 mm) to 11/5 in. (30 mm), max.

Telect, Inc. • USA +1.509.926.6000 • Mexico +1.52.33.3836.3700

 

Poland +1.48.713.239.100 • UK +1.44.1489.889500 • www.telect.com

Page 1-6

Copyright © 2002 Telect, Inc., All Rights Reserved