Teledyne 200AH Teledyne API Model 200AH NOX Analyzer Instruction Manual, 06492, Rev. G2 , 5-8 , Table 5-2: M200AH Setup Menu (Continued)

Teledyne API Model 200AH NOX Analyzer Instruction Manual, 06492, Rev. G2
5-8
Table 5-2: M200AH Setup Menu (Continued)
Level 1 Level 2 Level 3 Level 4 Description Reference
Section
ZERO-LO-
HI Do a zero, low, and high span calibrate 5.3.2, 6.2
LO Do a low span calibrate 5.3.2, 6.2
HI Do a high span calibrate 5.3.2, 6.2
LO-HI Do a low and high span calibrate 5.3.2, 6.2
SETTINGS
TIMER
ENABLE Enable/Disable chosen sequence 5.3.2,6.2
START
DATE Start date of selected sequence 5.3.2, 6.2
START
TIME Start time of selected sequence 5.3.2, 6.2
DELTA
DAYS Number of days to shift start time each time sequence is run 5.3.2, 6.2
DELTATI
ME Number of hours to shift start time each time sequence is run 5.3.2, 6.2
DURATIO
N Number of minutes to spend at each step in sequence 5.3.2, 6.2
CALIBRA
TE ON=compute new slope and/or offset OFF=do a span/zero check 5.3.2, 6.2
RANGE
TO CAL If AutoRange is ON, select which range to calibrate LO or HI 5.3.2, 6.2