Q2 OPERATION AND MAINTENANCE MANUAL 9601 45
T/B
Enables talkback signals to be routed to the Matrix output when the
communication system is used, with led indication. This can be
used to prevent talkback signals going to unwanted destinations.
ON
Enables the Matrix output, with led indication.
MATRIX METER
Sub-panel preset used to calibrate the Matrix level meter.
GROUP METERS (L, C, R)
Sub-panel presets used to calibrate the LCR Group level meters.
CUE/SOLO
Solo’s the Matrix signal to the main monitors (headphones or
loudspeakers), with flashing led indication. See the Input Module
for a functional description of the solo button.
FADER
The 60mm fader controls the level of the Matrix output signal.
SUB/LCR
Routes the group signal to the main LCR Stereo (Left/Right) and
Centre (mono) buses, with led indication.
ON
The ON switch enables the group output, and is indicated by an
led in the switch when the output is active. Internal links allow the
ON switch to be configured as a group CUT.
MATRIX SEND PRE
Allows the Group input to the Matrix to be fed pre-fader, rather
than post-fader.