THE STEREO GROUP OUTPUT MODULE
The stereo module is very similar to the mono group output but of course the signal paths must be duplicated. There are two group output signal paths and two matrix sends which can selected pre or post fader. The matrix returns are fed to ganged pots and the matrix output is again duplicated to give a stereo output.
Sub grouping to the L/R and Mono buses is done independently and there is a balance facility for the stereo sub signal. Soloing of the group and matrix signals is possible using identical circuitry to that described previously.
STEREO GROUP OUTPUT LINKS
Link | Function |
|
1, 2 | Group Bus Programming | ** |
3, 4 | Matrix Send Programming | ** |
(7), 8 | Post/Pre Mute Matrix Send |
|
(207), 208 | Post/Pre Mute Matrix Send R | |
11 | Link for non VCA version |
|
12, 13, (14) | Cut/On Lamp |
|
(15), 16 | Mute/Scene |
|
**Installed link depends upon module position ( ) Factory Position
Q2 OPERATIONAND MAINTENANCE MANUAL 9601 | 78 |
