MONITOR SECTION
Any of three sources may be fed to the monitoring section, in addition to the CUE/SOLO signal. If no source is selected, nothing is heard on monitors until a CUE/SOLO is pressed.
TAPE
Selects the Tape input as the monitor source.
L/R
Selects the main Stereo Left/Right output as the monitor source.
MONO
Selects the main Mono output as the monitor source.
If both L/R and MONO are pressed, monitoring is in true LCR mode, ie three channel outputs for simulation of the main speaker system. This facility is very useful when the console is located in a screened booth in a Theatre.
MONITOR LEVEL
Adjusts the level of the monitor outputs.
MONO
Assigns the monitor outputs to the mono (centre) monitor output.
DIM
Reduces the level of the monitoring system by 20dB.
ON
Enables the monitoring system.
Q2 OPERATIONAND MAINTENANCE MANUAL 9601 | 52 |
