Telex Q II - FOH specifications Mono Subgroup Output Module

MONO SUBGROUP OUTPUT MODULE

Either 8 or 16 mono subgroup modules may be fitted in Q2. If 16 are fitted, routing is paired, with active pan across the group buses at all times. For 8 modules, routing is individually selected, with pan only switched in across odd and even groups as required.

The module comprises the group control and output (lower part of module) and a matrix mixer section (upper part of module).

Each module has controls for inputs to the Matrix mixer, ie they are not feeds from that group to the matrix buses, but feeds from the groups etc to the matrix.

F/B 1/3

Adjusts the level of the Foldback 1 master output (or 3) fed to the Matrix bus on the module. This may be used to feed a global mix set-up on the F/B 1 bus to any of the 8 matrix outputs.

F/B 3 (switch)

Selects the Foldback output 3 to the matrix instead of F/B 1.

F/B 2/4

Adjusts the level of the Foldback 2 master output (or 4) fed to the Matrix bus on the module.

F/B 4 (switch)

Selects the Foldback output 4 to the matrix instead of F/B 2.

L/R

Adjusts the level of the summed (mono) signal from the main stereo left and right outputs fed to the Matrix on the module.

MONO

Adjusts the level of the main Mono (centre) signal from the main mono output fed to the Matrix on the module.

1

Adjusts the level of the post-fader Group 1 signal input to the Matrix. Similarly for Controls 2-8 for Group signals 2 to 8.

Q2 OPERATIONAND MAINTENANCE MANUAL 9601 36