Telex Q II - FOH specifications Meter

1

Routes the post-fade, post-pan channel signal to output bus 1, with led indication.

2 ( and 3, 4, 5, 6, 7, 8)

Routes the post-fade, post-pan channel signal to output bus 2 (and 3, 4, 5, 6, 7, and 8 if pressed), with led indication.

ON

The ON switch enables the channel signal path, and is indicated by an led in the switch when the channel is active. When OFF, all post-fade auxiliary sends and routing assignments are muted. Internal links allow the ON switch to be configured as a channel CUT.

METER

The six segment led meter comprises a five segment meter, fed from one of three points in the signal chain, and the PEAK led, which is fed simultaneously from all 3 points, giving a warning of potential overload signals within the signal path.

Q2 OPERATIONAND MAINTENANCE MANUAL 9601 25