Q2 OPERATION AND MAINTENANCE MANUAL 9601 22
AUXILIARIES
Q2 has eight auxiliary buses, accessed on the Input module from 4
sets of dual-concentric controls. In addition, the channel direct
output may be controlled via one pot, to provide extended auxiliary
sends. For convenient assignment four of the auxiliary buses are
denoted as foldback buses.
F/B 1 (Foldback 1, upper control)
Controls the level of the channel signal fed to the Foldback 1 bus.
This signal is normally post-fader, unless the PRE button, just
below, is depressed. Internal links on the module pcb allow the
pre-fader feed to be pre or post-EQ (paired with F/B 2).
F/B 2 (Foldback 2, lower control)
Controls the level of the channel signal fed to the Foldback 2 bus.
This signal is normally post-fader, unless the PRE button, just
below, is depressed.
PRE
Selects the signal feed for Foldbacks 1 and 2 to be pre-fader rather
than post-fader.
F/B 3 (Foldback 3, upper control)
Controls the level of the channel signal fed to the Foldback 3 bus.
This signal is normally post-fader, unless the PRE button, just
below, is depressed. Internal links on the module pcb allow the
pre-fader feed to be pre or post-EQ (paired with F/B 4).
F/B 4 (Foldback 4, lower control)
Controls the level of the channel signal fed to the Foldback 4 bus.
This signal is normally post-fader, unless the PRE button, just
below, is depressed.
PRE
Selects the signal feed for Foldbacks 3 and 4 to be pre-fader rather
than post-fader.