Q2 OPERATION AND MAINTENANCE MANUAL 9601 37
T/B
Enables talkback signals to be routed to the Matrix output when the
communication system is used, with led indication. This can be
used to prevent talkback signals going to unwanted destinations.
ON
Enables the Matrix output, with led indication.
MATRIX METER
Sub-panel preset used to calibrate the Matrix level meter.
GROUP METER
Sub-panel preset used to calibrate the Group level meter.
CUE/SOLO
Solo’s the Matrix signal to the main monitors (headphones or
loudspeakers), with flashing led indication. See the Input Module
for a functional description of the solo button.
FADER
The 60mm fader controls the level of the Matrix output signal.
PAN
Pans the Group signal across the main Stereo bus, or if in LCR
mode across the Left, Right and Centre (mono) buses. In the
centre, in L/R mode, the signals are 4.5dB below the signals when
hard-panned left or right.
PAN (mode)
In the ‘up’ position the pan mode is conventional Stereo (L/R)
panning. In the ‘down’ position, the group is panned across the
three main outputs in Left-Centre-Right mode.
When the pan is fully anti-clockwise, signal is sent only to the left
bus, with no signal to centre or right buses. In the centre, signal is
sent only to the centre (mono) bus, with no signal to left or right
buses.
When fully clockwise, signal is only sent to the right bus, with no
signal sent to left or centre buses.