The odd numbered group routing switches are mounted on the sub board along with the direct switch. Switches for enabling Foldbacks 1,2,3,4 and Auxiliaries 1,2 are also mounted on the sub board.
LK3 is normally installed but if removed and LK4 installed then auxiliary 3 is routed through the direct switch. This gives the option of having no direct switch but an auxiliary 3,4 enable switch is created.
INPUT SUB BOARD LINKS |
| |
LK | Function | * if factory installed |
1 | VCA fader |
|
2 | Audio fader | * |
3 | Aux 3 normal | * |
4 | Aux 3 depends on DIR switch | |
5 | CV Input | * |
6 | VCA Mute | * |
7 | Ground Link | * |
27Stereo module
28Mono module
Note that if an external fader is used then LK7 should be removed and the fader wired as shown in the drawing
Q2 OPERATIONAND MAINTENANCE MANUAL 9601 | 81 |
