Telex Q II - FOH specifications Stereo Subgroup Output Module, Mono

STEREO SUBGROUP OUTPUT MODULE

Eight stereo subgroup modules may be fitted in Q2, and routing is individually selected.

The module comprises the Stereo Group control and output (lower part of module) and a Stereo Matrix mixer section (upper part of module). Each module has controls for inputs to the Stereo Matrix mixer ie they are not feeds from that Group to the Matrix buses, but feeds from the Groups etc to the Matrix.

F/B 1/3

Adjusts the level of the Foldback 1 master output (or 3) fed to the Stereo Matrix bus on the module. This may be used to feed a global mix set-up on the F/B 1 bus to any of the 8 Stereo Matrix outputs. The control is a dual-concentric pair with Level and Pan adjust across the Stereo Matrix.

F/B 3 (switch)

Selects the Foldback output 3 to the matrix instead of F/B 1.

F/B 2/4

Adjusts the level of the Foldback 2 master output (or 4) fed to the Matrix bus on the module. The control is a dual-concentric pair with Level and Pan adjust across the Stereo Matrix.

F/B 4 (switch)

Selects the Foldback output 4 to the matrix instead of F/B 2.

L/R

Adjusts the level of the main Stereo Left and Right outputs fed to the Stereo Matrix on the module.

MONO

Adjusts the level of the main Mono (centre) signal from the main Mono output fed to both sides of the Stereo Matrix on the module.

1

Adjusts the level of the post-fader Stereo Group 1 signal input to the Stereo Matrix. Similarly for Controls 2-8 for Group signals 2 to 8.

Q2 OPERATIONAND MAINTENANCE MANUAL 9601 40