92  Section 7

Audio

Analog Inputs

♦♦ 2x send analog inputs

♦♦ 2x Program-on-Hold analog inputs

♦♦ XLR female, pin 2 high. Active balanced, with RF protection. ♦♦ Output level adjustable from –7 to +8 dBu (nominal)

♦♦ Analog clip point +21dBu

♦♦ Output impedance <60 Ohms x2

♦♦ Analog-to-digital converter resolution 20 bits ??

Analog Outputs

♦♦ 2x receive analog outputs ♦♦ XLR male, pin 3 high.

♦♦ Input level Adjustable, -7 to +8 dBu (nominal) level. ♦♦ Impedance Bridging, >100K Ohms

♦♦ Digital-to-analog converter resolution 20 bits ?? ♦♦ Headroom before clipping ??

AES3 Digital Inputs/Outputs (option)

The AES input/output option module substitutes 2x input and 2x output AES XLRs in place of the standard analog, providing 4x in/4x out channels.

♦♦ Conform to AES3 standard

♦♦ Sample rates 32, 44.1, and 48kHz.

♦♦ Rate conversion Input and output, independently selectable ♦♦ Clock AES input or ISDN network clock.

♦♦ Input Level Adjustable -27 to –12 dBfs ♦♦ Output Level Adjustable –27 to –12dBfs

Livewire

♦♦ Livewire connection is standard for all hybrids in/out and POH audio in

Audio Performance

Frequency Response ± .5dB, 50 to 20kHz (swept sine procedure, measured from analog input to output with unit in loopback mode)

THD+N/Input <0.06% typical (Measured at 0 dBu @ 1 kHz analog in to AES out in loop- back mode)

Switching Matrix and Conferencing

♦♦ All-digital audio routing and switching

Page 102
Image 102
Telos NX12 user manual Audio Performance, Switching Matrix and Conferencing, Livewire