2. Lift up the peel off enablers on both sides.
|
|
|
Lift up the peel off enablers | Push down the peel off enablers |
3.Pull supply holder tabs apart, and insert a roll of labels. Make sure the supply unwinds from the top as shown.
Note: Calibrate the gap/black mark sensor when changing media.
A roll of label.
Supply holder tabs | Release button |
| |
|
|
4.Remove a couple of labels from the liner. Insert the liner through the gap between peeler bar and
Peel roller
Peeler bar
Tear edge ( for liner)
Liner
11