4.1.1.4 Print Mode: (Tear Off Mode/Batch Mode/Peeler Mode)
Batch Mode
Peeler Mode
V
This option is used to set the print mode. Printer default setting is Batch Mode. When enter this list, the print mode in the right side of icon is the printer
current setting. Press 
button under and icon to select the different
print mode, and press 
button under “V” icon to enable the setting.
Printer Mode | Description | |
|
| |
Tear Off Mode: | Next label leading edge is aligned to the print head burn | |
line location. | ||
| ||
|
| |
Batch Mode: | Once image is printed completely, label gap/black mark will | |
be fed to the tear plate location for tear away. | ||
| ||
|
| |
Peeler Mode: | Enable the label peel off mode. | |
|
|
4.1.1.5 Offset:
Offset
+000
V
This option is used to fine tune media stop location. Press the 
button under icon to move the cursor from left digit to right digit, and press the
button to set the value from “+” to 
button under “V” icon to set the value into printer. The default value is +000.
4.1.1.6 Reference X & Reference Y:
Reference X
000
V
Reference Y
000
V
This option is used to set the origin of printer coordinate system horizontally
and vertically. Press the 
button under icon to move the cursor from left
digit to right digit, and press the 
button under icon to set the value from
“0” to “9”. Press the 
button under “V” to set the value into printer. The default value is 000.
25
