The Speaker Company M23 user manual Density, Direction

4.1.1.2 Density:

Density

7

+ - v

Use this option to setup printing darkness. The available setting is from 0 to 15, and the step is 1. Printer default density is 7.You may need to adjust your density based on selected media.

Press button under “+” / “-” icons to increase/decrease the printing darkness. Press button under “V” icon to enable the setting.

Note:

Density setting will affect printing speed. Printer will adjust the printing speed automatically to optimize the printing quality.

4.1.1.3 Direction:

Direction

0

+ - v

The direction setting value is either 1 or 0. Use this option to setup the printout direction. Printer default printout direction is DIRECTION 0.

Press button under “+” icon to set the direction as 1, and “–” icon to set it as 0, and “V” icon to enable the setting. The following 2 figures are the printouts of DIRECTION 0 and 1 for your reference.

DIRECTION 0

DIRECTION 1

24