What are the safety instructions for the Thermo Products Furnace?

The safety instructions for the Thermo Products Furnace can be found in Section I of the manual.

How do I start the Thermo Products Furnace?

Instructions for starting the Thermo Products Furnace are provided in Section V of the manual.

The wiring diagram for the furnace is available in Appendix-B of the manual.

			TABLE OF CONTENTS
SECTION			BEGINNING PAGE
I.	SAFETY INFORMATION			1
II.	FURNACE SPECIFICATIONS			7
III. GENERAL INSTRUCTIONS AND CLEARANCES				11
IV. GENERAL INSTALLATION				13
	A. FURNACE LOCATION			13
	B. BASE INSTALLATION			15
	C. ALCOVE INSTALLATION			16
	D. CLOSET INSTALLATION			14
	E. FUEL PIPING			19
	F. GENERAL VENTING REQUIREMENTS			20
	G. CONNECTING THE EXHAUST VENT, AND COMBUSTION			22
	AIR INTAKE
	H. DIRECT VENTING THROUGH A SIDEWALL			24
	I. INSTALLATION OF OUTSIDE EXHAUST/INTAKE TERMINATIONS			27
	J. CONNECTING THE FURNACE TO ROOF VENT/ INTAKE TERMINATIONS			28
	K. CONDENSATE DRAIN LINE AND TRAP ASSEMBLY			30
	L. ELECTRICAL WIRING			31
V.	STARTING THE UNIT			41
	A. SEQUENCE OF OPERATION			41
	B. INITIAL START-UP			43
	C. ADJUSTMENT OF BTU INPUT RATE			44
	D. BURNER ADJUSTMENT			45
	E. SETTING TEMPERATURE RISE			46
	F. FURNACE CHECK-OUT PROCEDURE			47
VI. INSTALLER'S INSTRUCTIONS TO USER				48
VII. DEALER MAINTENANCE				48
	A. ELECTRICAL			49
	B. GENERAL INSPECTION			49
	C. HEAT EXCHANGER			50
	D. HOUSE AIR BLOWER			50
	E. RETURN AIR FILTER			50
VIII. TROUBLE SHOOTING				51
APPENDIX-A		REPLACEMENT PARTS		58
APPENDIX-B		WIRING DIAGRAM		62
REFERENCED PUBLICATIONS:			FOR COPIES CONTACT:
NATIONAL FUEL GAS CODE			NATIONAL FIRE PROTECTION ASSOCIATION
NFPA 54/ANSI-Z233.1			1 BATTERYMARCH PARK
(LATEST EDITION)			P.O. BOX 9101
			QUINCY, MA 02269-9101